User's Manual
Table Of Contents
- SECTION 1 General Information
- SECTION 2 InterReach Fusion System Description
- SECTION 3 Fusion Main Hub
- SECTION 4 Fusion Expansion Hub
- SECTION 5 Remote Access Unit
- SECTION 6 Designing a Fusion Solution
- 6.1 Overview
- 6.2 Downlink RSSI Design Goal
- 6.3 Maximum Output Power per Carrier
- 6.3.2 700 MHz (Upper C)
- 6.4 System Gain
- 6.5 Estimating RF Coverage
- 6.6 Link Budget Analysis
- 6.6.1 Elements of a Link Budget for Narrowband Standards
- 6.7 Optical Power Budget
- 6.8 Connecting a Main Hub to a Base Station
- 6.8.1 Uplink Attenuation
- 6.8.2 RAU Attenuation and ALC
- SECTION 7 Installing Fusion
- 7.1 Installation Requirements
- 7.1.2 Cable and Connector Requirements
- 7.1.3 Distance Requirements
- 7.2 Safety Precautions
- 7.2.1 Installation Guidelines
- 7.2.2 General Safety Precautions
- 7.2.3 Fiber Port Safety Precautions
- 7.3 Preparing for System Installation
- 7.3.1 Pre-Installation Inspection
- 7.3.2 Installation Checklist
- 7.3.3 Tools and Materials Required
- 7.3.4 Optional Accessories
- 7.4 Fusion Installation Procedures
- 7.4.1 Installing a Fusion Main Hub
- 7.4.3 Installing RAUs
- 7.4.4 Configuring the System
- 7.5 Splicing Fiber Optic Cable
- 7.6 Interfacing the Fusion Main Hub to an RF Source
- 7.6.1 Connecting a Single Fusion Main Hub to an RF Source
- 7.7 Connecting Contact Alarms to a Fusion System
- 7.8 Alarm Monitoring Connectivity Options
- 7.8.1 Direct Connection
- 7.8.5 Ethernet RF Modem
- SECTION 8 Replacing Fusion Components
- SECTION 9 Maintenance, Troubleshooting, and Technical Assistance
- APPENDIX A Cables and Connectors
- APPENDIX B Compliance
- APPENDIX C Faults, Warnings, Status Tables for Fusion, Fusion Wideband, Fusion SingleStar
CONFIDENTIAL
InterReach Fusion Installation, Operation, and Reference Manual 3
D-620610-0-20 Rev F
Figure 7-41 Network Connections Window . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-64
Figure 7-42 New Connection Wizard - Welcome Window . . . . . . . . . . . . . . . . .7-64
Figure 7-43 New Connection Wizard - Network Connection Type Window . . .7-65
Figure 7-44 New Connection Wizard - Network Connection Window . . . . . . .7-65
Figure 7-45 New Connection Wizard - Connection Name Window . . . . . . . . . .7-66
Figure 7-46 New Connection Wizard - Phone Number to Dial Window . . . . . .7-66
Figure 7-47 New Connection Wizard - Connection Availability Window . . . . .7-67
Figure 7-48 New Connection Wizard - Completing New Connection Window .7-67
Figure 7-49 Connect Fusion Hub Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-68
Figure 7-50 Fusion Hub Properties Window . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-68
Figure 7-51 Modem Configuration Window . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-69
Figure 7-52 Fusion Hub Properties - Security Tab Window . . . . . . . . . . . . . . . .7-69
Figure 7-53 Fusion Hub Properties - Networking Tab Window . . . . . . . . . . . . .7-70
Figure 7-54 Internet Protocol Properties Window . . . . . . . . . . . . . . . . . . . . . . . .7-70
Figure 7-55 OA&M Connection using a 232 Port Expander . . . . . . . . . . . . . . .7-71
Figure 7-56 OA&M Connection Using a POTS Line Sharing Switch . . . . . . . .7-72
Figure 7-57 Cascading Line Sharing Switches . . . . . . . . . . . . . . . . . . . . . . . . . .7-73
Figure 7-58 OA&M Connection Using Ethernet and ENET/232 Serial Hub . . .7-74
Figure 7-59 Fusion SNMP Configuration Options . . . . . . . . . . . . . . . . . . . . . . .7-75
Figure A-1 CommScope 2065V for RG-59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Figure A-2 CommScope 2279V for RG-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Figure A-3 CommScope 2293K for RG-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
Figure A-1 Standard Modem Cable Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9
Figure A-2 Wiring Map for TCP/IP Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-10
Figure A-3 DB-9 Female to DB-9 Female Null Modem Cable Diagram . . . . A-11