User's Manual Part 2

Faults for Expansion Hubs

InterReach Fusion Wideband Installation, Operation, and Reference Manual Page 215

{EF37} Problem detected in the EH. Contact TE Support for more information.

{EF38} Problem detected in the EH. Contact TE Support for more information.

{EF39} Problem detected in the EH. Contact TE Support for more information.

{EF40} Problem detected in the EH. Contact TE Support for more information.

{ED129} Port 1 Disconnected. Unit is disconnected.

{ED130} Port 2 Disconnected. Unit is disconnected.

{ED131} Port 3 Disconnected. Unit is disconnected.

{ED132} Port 4 Disconnected. Unit is disconnected.

{ED133} Port 5 Disconnected. Unit is disconnected.

{ED134} Port 6 Disconnected. Unit is disconnected.

{ED135} Port 7 Disconnected. Unit is disconnected.

{ED136} Port 8 Disconnected. Unit is disconnected.

{EC137} Port 1 No Communications. No communications with remote unit.

{EC138} Port 2 No Communications. No communications with remote unit.

{EC139} Port 3 No Communications. No communications with remote unit.

{EC140} Port 4 No Communications. No communications with remote unit.

{EC141} Port 5 No Communications. No communications with remote unit.

{EC142} Port 6 No Communications. No communications with remote unit.

{EC143} Port 7 No Communications. No communications with remote unit.

{EC144} Port 8 No Communications. No communications with remote unit.

{ET145} Port 1 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.

{ET146} Port 2 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.

{ET147} Port 3 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.

{ET148} Port 4 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.

{ET149} Port 5 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.

{ET150} Port 6 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.

{ET151} Port 7 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.

{ET152} Port 8 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.

{ET153} Port 1 Trip. The Remote Unit is drawing too much current.

{ET154} Port 2 Trip. The Remote Unit is drawing too much current.

{ET155} Port 3 Trip. The Remote Unit is drawing too much current.

{ET156} Port 4 Trip. The Remote Unit is drawing too much current.

{ET157} Port 5 Trip. The Remote Unit is drawing too much current.

{ET158} Port 6 Trip. The Remote Unit is drawing too much current.

{ET159} Port 7 Trip. The Remote Unit is drawing too much current.

{ET160} Port 8 Trip. The Remote Unit is drawing too much current.

Table100. FaultMessagesforExpansionHubs(Cont.)

Message

Number

Description Reason/Action