User's Manual Part 1

Fusion Wideband Expansion Hub

Page 44 InterReach Fusion Wideband Installation, Operation, and Reference Manual

ExpansionHubFrontPanel

Figure15.Expansion Hub Front Panel

Ref # Description

1 One port LED and connector pair for 8 ports (labeled Port n, where n = 1 - 8):

• One port LED per type F connector port for link status and downstream RAU status (8 pair total).

• Eight CATV cable, type F connectors

2 One pair of unit status LEDs

• One LED for unit power status (labeled POWER)

• One LED for unit status (labeled E-HUB STATUS)

3 One set of fiber status LEDs

• One LED for fiber uplink status (labeled UL STATUS)

• One LED for fiber downlink status (labeled DL STATUS)

4 One fiber optic port which has two connectors

• One standard female SC/APC connector for MMF/SMF output (labeled Uplink)

• One standard female SC/APC connector for MMF/SMF input (labeled Downlink)

5 One 9-pin D-sub male connector for TE factory testing (labeled Console)

6 One RJ-45 female connector for system communication and diagnostics using a PC/laptop with direct connect or

using a LAN switch (labeled Admin/Lan)

7 Power Switch

Unit is not shown to scale.

Port 1

CONSOLE

Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 Port 8

UPLINK

DOWNLINK

InterReach Fusion

Expansion Hub

ADMIN/LAN

POWER

EH STATUS

DL STATUS

UL STATUS

Port 1

2 3 4