User's Manual Part 1

Installing Fusion Wideband
Page 116 InterReach Fusion Wideband Installation, Operation, and Reference Manual
© 2013 TE Connectivity Ltd D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013
ǡ
Ǥ
NOTE: Themaximumweightthebracketcanholdis22.5kg(50lbs).
NOTE: ThebracketisdesignedtoaccommodateaFusionWidebandMainHub(12lbs.)oranExpansion
Hub(14.5lbs.).
NOTE: Thewallmountbracketshouldbesecurelymountedtowall,usingthefourkeyslotmounting
holesonthebracket.
NOTE: TherackͲmountingbracketsontheFusionWidebandMainHubmustbemovedtotherecessed
mountingposition(showninFigure22)toallowfortherequired76mm(3in.)rearclearance.
1 ȋͶ͹ͳʹȌͳͲǡͳǦͳȀʹdz
͵ȀͶDzǤ
Ǥȋ
ʹʹǤȌ
NOTE: Ifwallstud spacing of 16” isnotavailable, preͲinstall 3/4”plywood to the wall. You canthen
attachthebrackettotheplywoodusingthewoodscrews.
Figure22.Bracket Detail For Wall Mount Rack (PN 4712)
2 Ǥ
3 Ǥ
4 Ǥ
3 InstallinganOptionalCableManagerintheRack
3 InstallingaMainHubUsingthe12”WallͲMountedRack(PN4712)