User's Manual Part 2

Preparing for System Installation
InterReach Fusion Wideband Installation, Operation, and Reference Manual Page 113
D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013 © 2013 TE Connectivity Ltd.
ToolsandMaterialsRequired
Distances
Fusion Wideband Main Hub is with
in 3–6m 
(10–20 ft) of connecting
r
epeater/BTS/FlexWave
If longer distance, determine the loss of the cable used for this
connection an
d adjust the RF signal for each Band into the Fusion
Wideband Main Hub accordingly. This can be done by readjusting the
power from the base station, or by changing the attenuation value
between the base station/repeater and the Hub Bands (1 and 2).
Table85. ToolsandMaterialsRequiredforComponentInstallation

Description
Cable ties
Screwdriver
Mounting screws and spring nuts
Screws, anchors (for mounting
RAUs)
Drill
Fiber connector cleaning kit
Fusion Wideband splicer
Splicing tool kit (including snips, cladding strippers, fiber cleaver,
isopropyl alcohol,
lint-free wipes)
Fusion Wideband splicing sleeves
Table84. InstallationChecklist(Cont.)

Installation Requirement Consideration