User's Manual Part 2

Alarm Monitoring Connectivity Options
InterReach Fusion Wideband Installation, Operation, and Reference Manual Page 169
D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013 © 2013 TE Connectivity Ltd.
15 SelectInternetProtocol(TCP/IP)asshownandclickProperties;thewindowshownbelow
opens.
16 SelectObtainanIPadd
ressautomaticallyandObtainDNSserveraddressautomatically,and
thenclickOK.
17 To
connecttotheFusionWidebandHubovertheDial‐upconnection,startyouwebbrowser
andthenintheaddressbar,typetheserverIPaddressconfiguredin“SettingUpFusion
WidebandModem(USRModem)UsingAd
minBrowser”onpage163.
100BASE‐TPortExpanderConnection
InthisconfigurationaLANswitchisusedtoallowtheconnectionofmultipledevicestoasingle
PCwitha100BASE‐Tport.TestingwasperformedwithaLinksys4‐portswitch.EachFusion
WidebandMHmusthaveauniqueIPaddress.
Figure54.
OA&M Connection using a 232 Port Expander
PC running
Standard
Browser
Software
LAN Switch
100 BASE-T
Ethernet connection
AdminBrowser is
resident in Fusion.
100 BASE-T Cable
RJ-45 Male to RJ-45 Male