User's Manual Part 2

Alarm Monitoring Connectivity Options
InterReach Fusion Wideband Installation, Operation, and Reference Manual Page 163
D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013 © 2013 TE Connectivity Ltd.
ModemswitchsettingsareasfollowsforUSRoboticsmodem:
• PC‐s
ide:1,2and6Up
• FusionWidebandHub‐side:
2and6Up.
SettingUpFusionWidebandModem(USRModem)UsingAdminBrowser
UsethefollowingstepstosetupaPPPDial‐InonFusionWideband:
1 Sta
rtAdminBrowserasexplainedintheAdminBrowsermanual.
2 SelectSystemConfiguration.
3 SelectSetupMo
demConnection.thewindowshownbelowopens:
4 M
akesurethemodemtypeis:None.
• Themodeminitstring
isforaUSRmodem
• Theserveraddres
sistheIPaddressoftheMH
5 ClickSet
upConnection.
TE