User's Manual Part 2

Installing Fusion Wideband
Page 162 InterReach Fusion Wideband Installation, Operation, and Reference Manual
© 2013 TE Connectivity Ltd D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013
ALARMMONITORINGCONNECTIVITYOPTIONS
NOTE: Thefollowingprocedures assume thatthesystem isinstalledand thathas been programmed
withbands.
DirectConnection
Inthisconfiguration,thePCconnectsdirectlytotheRJ-45 100 BASE-T portontheFusionWideband
MainHub’sfrontpanelusinganEthernetcross‐overcable.
Figure52
.OA&M Direct Connection
ModemConnection
Inthisconfiguration,thePCandtheFusionWidebandMainHubconnecttoanalogmodemsand
communicateusingastandarddial‐uptelephoneconnection.
Figure53
.OA&M Modem Connection
NOTE: Referto“CoaxialCable”onpage198forthemodemcablewiringinformation.
PC running
Standard
Browser
Software
Cross-over
100 BASE-T Cable
AdminBrowser is
resident in Fusion.
PSTN
PC running
Standard
Browser
Software
Modem
#140272-0
Modem
#140272-0
#4028-10
Straight-Through
Modem cable
#4028-10
Straight-Through
Modem cable