User's Manual Part 2

Installing Fusion Wideband
Page 142 InterReach Fusion Wideband Installation, Operation, and Reference Manual
© 2013 TE Connectivity Ltd D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013
11 Usethescrollbarontheleftsideofthepagetoscrolldowntoviewtherestofthepageas
shownbelow.
12 In
theBandspanel,dothefollowing:
• Y
oushouldnothavetoselectthebands.Thesystemselfconfiguresthebandbyvalidating
thatalltheRAUsconnectedarethesametype.
• Wh
enbothbandsarenotconfigured,usetheShutdowncheckbox.Thesystemwillignore
anyalarmsgeneratedfromtheshutdownbands.
• Us
etheUplinkandDownlinkmenustoselectthegainforeachband.Youcansetsystem
gainwithinthespecifiedrangein1dBincrements.
• Us
etheUplinkAutomaticLevelControlmenutoselecteitherSingleorMultiple(default)
foreachbandinthesystem.
13 FORWiMAXINSTALLATIONSONLY:U
sethescrollbarontheleftsideofthepagetoscroll
downtoviewthenextpartofthewindowsshownbelow.