User's Manual Part 2

Configuring the Fusion Wideband System
InterReach Fusion Wideband Installation, Operation, and Reference Manual Page 141
D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013 © 2013 TE Connectivity Ltd.
8 SelecttheFusionMainHubandclickInstall/ConfigureSystem.Ascreensimilartotheone
shownbelowopens.
9 Ifdesire
d,typeinaLabel.
Thelabelisthesystemnamedisplayednexttotheiconsandused
inmessages.Itcanbeupto
32characterslongdependinguponthefirmwareversion.
ThedefaultsystemlabelisFusion,an
dwillbeusedifyouenternothing.
10 Use
thenextsectiontoscheduleaSystemTest.
Thissectionallowsyouto
dothefollowing:
• Clickthecheckboxtoena
blethisfeature.
• Clickthecheckboxtocausesystemtestonpowerup.
• Ente
rvaluestoschedulethedateandtimeofthenextsystemtest.
• Enter
valuestospecifytherecurrenceofthetestbydayorbyweek.
ScheduleSystemTestallowsperio
dic,automaticexecutionofthesystemend‐to‐endtest.Just
likePerformSystemTest,aScheduleSystemTestsuspendsnormalservicefortheduration
ofthetest;callsaredropped,andnonewcallscanbeestablishedduringthetest.Test
durationdependsontheconfiguration(numberofRAUs)andrequiresoneortwominutesto
complete.
Aftercompletionofthe
systemtest,thescheduledsystemtesttimeisupdatedtothenexttest
time,andaneventlogentryismade.