User's Manual Part 2

Installing Fusion Wideband
Page 140 InterReach Fusion Wideband Installation, Operation, and Reference Manual
© 2013 TE Connectivity Ltd D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013
4 MakenoteofthecurrentIPaddress,Subnetmask,andDefaultgateway,iftheyareconfigured.
Youwillneedtore‐enterthemafteryouhaveconfiguredtheFusionWidebandMainHub.
5 Select
Use the following IP address.
6 Changethe
IP addressto192.168.0.101
7 Changethe
Subnet maskto255.255.255.0
8 Changethe
Default gateway to192.168.0.1
9 ClickOK
twice.Youmaybeaskedifyouwanttorebootyourcomputer.Ifso,clickYes.
UsingAdminBrowser
ToaccessFusionWidebandusingAdminBrowser,usethefollowingsteps:
1 Make
suretheMainHubStatusLEDisgreen.
2 Typ
ethefollowingintheURLline:
Https://192.168.0.100
3 ClickGo.
4 Wh
enAdminBrowserappears,loginusingthedefaultuserID:operator,andthedefault
password:password.
5 Wh
enAdminBrowserappears,loginusingthedefaultuserIDandthepassword,whichare
respectively:operatorandpassword.
6 ClickSyst
emConfigurationandthenclickSetDate/Time.Apagesimilartooneshownbelow
opens.
7 EnterthedesiredtimeanddateintheformatindicatedonthepageandclickSetDa
te/Time.
Apageappearsrequiringyoutorebootthesystemforthenewdateandtimetotakeeffect.