User's Manual Part 2

Installing a Fusion Wideband Main Hub
InterReach Fusion Wideband Installation, Operation, and Reference Manual Page 117
D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013 © 2013 TE Connectivity Ltd.
DothefollowingtoinstalltheHubdirectlytothewall:
1 Pr
e‐install3/4”plywoodtothewall.
2 Mount
bothoftherackmountingbracketsusing#10‐32machinescrews,asshownin
Figure23.
Figure23.
Using Hub Rack-Mounting Brackets for Direct Wall Installation
3 AttachtheHubtothewallsothemountingbracketsareorientatedatthetopandbottomof
thewallmountedhub,asshowninFigure24.
Figure24.
Installing Directly to the Wall
 InstallingaFusionWidebandMainHubDirectlytotheWall
Use two #10 Pan Head wood screws,
1-1/2” length, to secure each bracket
to the plywood. In this orientation the
enclosure fans will face to the left.