User's Manual Part 1

Faults, Warnings, and Status Messages
InterReach Fusion Wideband Installation, Operation, and Reference Manual Page 39
D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013 © 2013 TE Connectivity Ltd.
Figure12.Preferences Check Boxes
Tomodifythesetting,usingAdminBrowser,selectAlarmsgSetAlarmPreferenceandselectthe
desiredchoice.AfteryouclickOK,AdminBrowserrefreshesandupdatesthetreeviewaccording
tothenewsetting.
NOTE: ThesettingisstrictlyvisualandonlyinAdminBrowser.Thereisnoaffectonthehardwareitself.
Bydefault,theeventfilteringissetto“EnableviewingofFaultsonly”.
TheonlyexceptiontowhentheeventfilteringisignoredisduringtheInstall/Configure
command.Alleventsaredisplayedregardlessoftheeventfilteringsetting.Thisensuresasmooth
installation.