User's Manual Part 1

Fusion Wideband Main Hub
Page 38 InterReach Fusion Wideband Installation, Operation, and Reference Manual
© 2013 TE Connectivity Ltd D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013
FAULTS,WARNINGS,ANDSTATUSMESSAGES
TheFusionWidebandMainHubmonitorsandreportschangesoreventsinsystemperformance
to:
• Ensuret
hatfiberreceivers,amplifiersandIF/RFpathsarefunctioningproperly.
• Ensure
thatExpansionHubsandRemoteAccessUnitsareconnectedandfunctioning
properly.
Events
Aneventisclassifiedasfault,warning,orstatusmessage.
• Fa
ultsareserviceimpacting.
• Warningsindicateapossibleserviceimpact.
• Statusandinformatio
nalmessagesaregenerallynotserviceimpacting.
TheFusionWidebandMainHubperiodicallyqueriesattachedExpans
ionHubandRemoteAccess
Unitsfortheirstatus.BothfaultsandwarningsarereportedtoaconnectedPC/laptoprunninga
standardbrowsercommunicatingwiththeAdminBrowsersoftware.Onlyfaultsareindicatedby
thefaceplateLEDs.
Formoreinformationregarding
theevents,referto:
• “AppendixC:Faults,Warnings,St
atusTablesforFusion,FusionWideband,FusionSingleStar”
onpage209for
– Main
Hubfaults
– Main
Hubwarnings
– Main
Hubstatusmessages
• “Maintenance,Troubleshooting,andTechnicalAssistance”onpage181fortroubleshooting
MainHubLEDs.
ViewPreference
AdminBrowser1.0orhigherenablesyoutoselect(usingthescreenshowninFigure12)thetype
ofeventstobedisplayed.