User's Manual Part 1
Table Of Contents
- Preface
- InterReach Fusion Wideband System Description
- System Overview
- System Hardware Description
- System OA&M Capabilities Overview
- System Connectivity
- System Operation
- System Specifications
- RF End-to-End Performance
- 2100/1800 RAU (FSN-W1-2118-1)
- 2100 HP/1800 HP (FSN-W1-2118-1-HP)
- 2100 High Power RAU (FSN-W1-21HP-1)
- 1900/AWS RAU (FSN-W1-1921-1)
- 800/850/1900 RAU (FSN-W2-808519-1)
- 700/AWS RAU (FSN-W2-7021-1)
- 700/700 (Upper C) MIMO RAU (FSN-W2-7575-1)
- 700/700 (Lower ABC) MIMO RAU (FSN-W2-7070-1)
- 700 ABC/AWS HP/AWS HP RAU (FSN-W4-702121-1-HP)
- 700 UC/AWS HP/AWS HP RAU (FSN-W4-752121-1-HP)
- 850/1900 HP/AWS HP RAU (FSN-W5-851921-1-HP)
- 2500/2500 RAU (FSN-2500-2-WMAX)
- 2600/2600 RAU (FSN-W3-2626-1)
- Fusion Wideband Main Hub
- Fusion Wideband Expansion Hub
- Remote Access Unit
- Designing a Fusion Wideband Solution
- Overview
- Downlink RSSI Design Goal
- Maximum Output Power per Carrier
- 700/AWS RAU (FSN-W2-7021-1)
- 700 MHz (Upper C) MIMO RAU (FSN-W2-7575-1)
- 700 MHz (Lower ABC) MIMO RAU (FSN-W2-7070-1)
- 700 ABC/AWS HP/AWS HP RAU (FSN-W4-702121-1-HP)
- 700 UC/AWS HP/AWS HP RAU (FSN-W4-752121-1-HP)
- 800/850/1900 RAU (FSN-W2-808519-1)
- 850/1900 HP/AWS HP RAU (FSN-W5-851921-1-HP)
- 1900/AWS RAU (FSN-W1-1921-1)
- 2100/1800 RAU (FSN-W1-2118-1)
- 2100 HP/1800 HP RAU (FSN-W1-2118-1-HP)
- 2100 High Power RAU (FSN-W1-21HP-1)
- 2500/2500 WiMAX RAU (FSN-2500-2-WMAX)
- 2600 MHz MIMO RAU (FSN-W3-2626-1)
- Designing for Capacity Growth
- System Gain
- Estimating RF Coverage
- Link Budget Analysis
- Optical Power Budget
- Connecting a Main Hub to a Base Station
- Installing Fusion Wideband
Fusion Wideband Main Hub Front Panel
InterReach Fusion Wideband Installation, Operation, and Reference Manual Page 35
D-620616-0-20 Rev H • TECP-77-044 Issue 7 • May 2013 © 2013 TE Connectivity Ltd.
FusionWidebandMainHubRearPanel
Figure11.Fusion Wideband Main Hub Rear Panel
Table30. FusionWidebandHubPortLEDStates
LED State Indicates
Off • The Expansion Hub is not connected.
Green
• The Expansion Hub is connected.
•
There are no faults from the Expansion Hub or any connected RAU.
Red
(60 PPM)
• There was a loss of communications with
the Expansion Hub.
Red
(Steady)
• The Expansion Hub is disconnected.
•
The Expansion Hub or any connected RAU reported a fault.
Green
(60-
ppm)
• The Expansion Hub or any connected RAU reported a lockout condition.
Ref # Description
1 One 9-pin D-sub female connector labeled “Alarms” for contac
t alarm monitoring
2 Three N-type, female connectors for each
band (Band 1, Band 2, and Band 3):
• Uplink (labeled Ul1, Ul2, and UL3)
•
Downlink (labeled DL1, Dl2, and DL3)
3 Two air exhaust vents
4 AC power cord connector
5 Ground lug labeled “Ground” that conn
ects the unit to frame ground
PORT
PORT
PORT
PORT
PORT
1 43
Unit is not shown to scale.
Alarms
AC Power
Band 1 Band 2 Band 3
UL1 UL2 UL3
DL1 DL2 DL3
2
5