User's Manual

C-4 InterReach Fusion Installation, Operation, and Reference Manual
CONFIDENTIAL D-620610-0-20 Rev D
{MT150} Port 6 Cable Fault. Possible electrical short in the coax cable, or RAU
problem.
{MT151} Port 7 Cable Fault. Possible electrical short in the coax cable, or RAU
problem.
{MT152} Port 8 Cable Fault. Possible electrical short in the coax cable, or RAU
problem.
{MT153} Port 1 Trip. Remote Unit is drawing too much current.
{MT154} Port 2 Trip. Remote Unit is drawing too much current.
{MT155} Port 3 Trip. Remote Unit is drawing too much current.
{MT156} Port 4 Trip. Remote Unit is drawing too much current.
{MT157} Port 5 Trip. Remote Unit is drawing too much current.
{MT158} Port 6 Trip. Remote Unit is drawing too much current.
{MT159} Port 7 Trip. Remote Unit is drawing too much current.
{MT160} Port 8 Trip. Remote Unit is drawing too much current.
{MF161} Problem detected in the Hub. Contact ADC Support for more information.
{MF162} Problem detected in the Hub. Contact ADC Support for more information.
{MF163} Problem detected in the Hub. Contact ADC Support for more information.
{MF164} Problem detected in the Hub. Contact ADC Support for more information.
{MF165} Problem detected in the Hub. Contact ADC Support for more information.
{MF166} Problem detected in the Hub. Contact ADC Support for more information.
{MF167} Problem detected in the Hub. Contact ADC Support for more information.
{MF168} Problem detected in the Hub. Contact ADC Support for more information.
{MF169} Problem detected in the Hub. Contact ADC Support for more information.
{MF170} Problem detected in the Hub. Contact ADC Support for more information.
{MF171} Problem detected in the Hub. Contact ADC Support for more information.
{MF172} Problem detected in the Hub. Contact ADC Support for more information.
{MF173} Problem detected in the Hub. Contact ADC Support for more information.
{MF174} Problem detected in the Hub. Contact ADC Support for more information.
{MF175} Problem detected in the Hub. Contact ADC Support for more information.
{MF176} Problem detected in the Hub. Contact ADC Support for more information.
Table C-1 Fault Messages for Main Hubs (continued)
Message
Number Description Reason/Action