User's Manual

InterReach Fusion Wideband Installation, Operation, and Referencer Manual C-1
D-620616-0-20 Rev A CONFIDENTIAL
APPENDIX C Faults, Warnings, Status Tables
This appendix contains the following sections:
• Section C.1 Faults Reported by Fusion Wideband Main/SingleStar Hubs . . A-1
• Section C.2 Faults Reported for System CPU . . . . . . . . . . . . . . . . . . . . . . . . A-5
• Section C.3 Faults for Fusion Wideband Expansion Hubs . . . . . . . . . . . . . . A-6
• Section C.4 Faults for RAUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8
• Section C.5 Warning/Status Messages for Fusion Wideband Main/SingleStar
Hubs A-10
• Section C.6 Warning/Status Messages for System CPUs . . . . . . . . . . . . . . A-15
• Section C.7 Warning/Status Messages for Fusion Expansion Hubs . . . . . . A-16
• Section C.8 Warning /Status Messages for RAUs . . . . . . . . . . . . . . . . . . . . A-19
The following tables contain messages for all versions of firmware, but all messages
are not displayed by a given firmware version.
C.1 Faults Reported by Fusion Wideband
Main/SingleStar Hubs
Faults indicate service-impacting conditions and should be given immediate atten-
tion.
Once all of the units are powered on and the cable connections are made, the faults
from each unit can be requested using AdminBrowser. Start with the Fusion Wide-
band Main Hub and work downstream.
Resolve all faults first and then check the warnings. Take appropriate action to
resolve the faults, as indicated in the following tables. In cases where there is more
than one possible cause, they are listed from the “most likely” to the “least likely”