User's Manual

WiMax Optical Fiber Repeater 10W Installation and Operation Manual
Document No. 913011900 Rev. 1.1 Proprietary Document v
Warranty Limitations
Under no circumstances will ADC Telecommunications, Inc. be liable in any way to
the user or any third party for damages, including any loss of profits, lost savings, or
other incidental or consequential damages arising out of the use, or inability to use,
the product.
System Measurement and Testing Warnings
WARNING
When installing equipment, always connect the grounding
cable first, only then connect the other cables.
When testing the units in the lab or during field installation,
always practice RF radiation safety rules. It is not
recommended for service or lab personnel to work closer
than two meters from the Remote unit antenna surfaces
when it is operating.
CAUTIONS
• Switch off the AC or DC power to the unit before
connecting or disconnecting any cable.
• Do not connect or disconnect any RF coaxial
connectors while power is applied to the Repeater.
Disconnect power first.
• Do not apply more than +10dBm of RF input power to
any RF port of the OR system, or irreversible damage
may occur.
• When measuring high power outputs, always verify
that the equipment input port is capable of handling
the expected output power.
• During lab or field tests, with power applied to the
Repeater, do not use any mobile transmitters in a
range of less than 10 meters from the unit. An
unexpectedly high RF power might appear at the
output ports, which might in turn damage the
measuring equipment connected to that port.