User's Manual

WiMax Optical Fiber Repeater 10W Installation and Operation Manual
Document No. 913011900 Rev. 1.1 Proprietary Document
3-3
If the system is connected properly (Host & Remote), the application should identify it and
show it as a new link.
If no link is connected, the following screen appears (figure 3-4):
Figure 3-4
If you click on “Modify Link” at the right, you will be able to introduce the geographic
coordinates of the Remote unit and the name of the link. See figure 3-5.
Figure 3-5
The Longitude / Latitude supports the format +/- dd.dddddd (decimal degrees).