User's Manual

WiMax Optical Fiber Repeater 10W Installation and Operation Manual
Document No. 913011900 Rev. 1.1 Proprietary Document
2-9
2.6.5 Cables Connection
1. Connect the Ground screw of the Remote unit (located at the side of the
unit) to either earth-ground or the ground-rod of the building. Tighten the
ground screw using a 7/16" spanner
2. Connect RF cable to the distribution (service) antenna.
3. Connect the optical fiber to the Remote Unit (Clean professionally the fiber
connector).
4. Connect the power cable.
Figure 2-3: Remote Unit Panel
Sealing Screw