User's Manual

WiMax Optical Fiber Repeater 10W Installation and Operation Manual
Document No. 913011900 Rev. 1.1 Proprietary Document
2-4
2.3 Host Unit Installation
1. Locate the neccassary space for mounting the Host unit inside the BTS
enclosure or close to it.
2. Turn off transmission of the BTS when installing the Host unit.
2.3.1 Mount the Host Unit
2.3.2 Outside the BTS enclosure
1. The unit is designed to fit into 19” rack. In case of 23” rack, a proper
adapter should be used.
2. Mount the Host unit in a way that will enable good accesibilty to the fiber,
AC and RF connections.
2.3.3 Inside the BTS enclosure
Locate the necessary space and fix the Host unit professionally, making sure
not to block air circulation to the unit
2.3.4 Prepare the Electrical Power Connections
WARNING
Recap the power connectors until the Host Unit is ready to be
set up. Do not connect the power yet.
CAUTION
Power to the Host Unit site must be supplied according to the
safety standards in the corresponding country (grounded
outlets, circuit breaker, conduits, etc.).