User's Manual

2 Installation Procedure

NOTE: Installing an OR requires a site plan, which is a document

defining the planned parameters of the cellular network. Parameters

include the channel number in use, desired Repeater’s coverage

area, gain settings, and antenna location. If necessary, consult your

network administrator for more information.

2.1 Pre-installation Procedures

2.1.1 Receiving and Inspecting the Repeater

CAUTION

Verify that the packages are complete and undamaged. If

the boxes appear damaged, do not open the shipment.

Never ship any unit without adequate packing!

Follow this procedure prior to installation:

1. Unpack the shipment box.

2. Verify the contents of the box against the packing list.

3. Inspect the OR units for possible damage.

The items in Table 2-1 are required for the installation. They are supplied

separately from the installation kit.