User Manual

ADCP-75-116 • Issue A • August 2001 • Section 4: Operation
Page 4-17
© 2001, ADC Telecommunications, Inc.
6. Enter the attenuation value that will provide the required gain. Refer to Table 4-3 for the
attenuation values and the corresponding gain values.
7. Click OK to close the pop-up screen and to make the changes take effect.
8. Repeat the process for the diversity reverse path by right-clicking on the Host Div Rev Att
section (see Figure 4-12) and then entering the required attenuation value in the Host Dive
Rev Att pop-up screen.
9. Click OK to close the pop-up screen and to make the changes take effect.
Table 4-3. Reverse Path Setting
ATTENUATION
SETTING
GAIN
PROVIDED
ATTENUATION
SETTING
GAIN
PROVIDED
ATTENUATION
SETTING
GAIN
PROVIDED
0 dB → 30 dB 11 dB → 19 dB 22 dB → 8 dB
1 dB 29 dB 12 dB 18 dB 23 dB 7 dB
2 dB 28 dB 13 dB 17 dB 24 dB 6 dB
3 dB 27 dB 14 dB 16 dB 25 dB 5 dB
4 dB 26 dB 15 dB 15 dB 26 dB 4 dB
5 dB 25 dB 16 dB 14 dB 27 dB 3 dB
6 dB 24 dB 17 dB 13 dB 28 dB 2 dB
7 dB 23 dB 18 dB 12 dB 29 dB 1 dB
8 dB 22 dB 19 dB 11 dB 30 dB 0 dB
9 dB 21 dB 20 dB 10 dB - -
10 dB 20 dB 21 dB 9 dB - -