User Manual

ADCP-75-110 • Issue B • March 2001
Page vii
 2001, ADC Telecommunications, Inc.
Danger: Always allow sufficient fiber length to permit routing without severe bends. Fibers
may be permanently damaged if bent/curved to a radius of less than 1.5 inches (38 mm).
STANDARDS CERTIFICATION
FCC: This equipment complies with the applicable sections of Title 47 CFR Parts 15, 22, 24, and
90.
UL/CUL: This equipment complies with UL and CUL 1950 Standard for Safety for
Information Technology Equipment, Including Electrical Business Equipment.
FDA/CDRH: This equipment uses a Class 1 LASER according to FDA/CDRH Rules. This
product conforms to all applicable standards of 21 CFR Part 1040.
LIST OF ACRONYMS AND ABBREVIATIONS
The acronyms and abbreviations used in this manual are detailed in the following list:
A Amperes
AC Alternating Current
AGC Automatic Gain Control
AMPS Advanced Mobile Phone Service
CDMA Code Division Multiple Access
CDRH Center for Devices and Radiological Health
CUL Canadian Underwriters Laboratories
DAS Distributed Antenna System
DC Direct Current
DEU Digital Expansion Unit
DHU Digital Host Unit
DRU Digital Remote Unit
EIA Electronic Industries Association
ERP Effective Radiated Power
ESD Electrostatic Discharge
FCC Federal Communications Commission
FDA Food and Drug Administration
ICS Indoor Coverage Solution
LIU Local Interface Unit
NOC Network Operations Center
PWR Power
RIU Remote Interface Unit
RF Radio Frequency