User's Manual

ADCP-75-110 • Issue 2B • July 2001
Page 15
© 2001, ADC Telecommunications, Inc.
Table 5. System Specifications, continued
PARAMETER SPECIFICATION REMARKS
Physical/Electrical – DHU
Weight 18.5 lbs (8.4 kg)
RF connection Type N Female
Alarm connection Screw terminals (14–26 AWG) NO, NC, and COM
Optical connection Duplex LC transceiver
DC pwr output connection RJ-45 Female
Power input 120/240 Vac, 50–60 Hz
AC power connection IEC 320 Male
Power consumption 250 W Maximum
Current rating 85–250 Vac, 2 Amp input
Physical/Electrical – DEU
Weight 18.5 lbs (8.4 kg)
Optical connection Duplex LC transceiver
DC pwr output connection RJ-45 Female
Power input 120/240 Vac, 50–60 Hz
AC power connection IEC 320 Male
Power consumption 250 W Maximum
Current rating 85–250 Vac, 2 Amp input
Physical/Electrical – DRU
Weight 1.5 lbs (708 g)
RF connection SMA Female
800 MHz antenna types Ceiling mount omni directional
70º directional panel
90º directional panel
Ceiling mount hallway
2.5 dBi gain
8 dBi gain
7.5 dBi gain
4 dBi gain
1900 MHz antenna types Ceiling mount omni directional
90º directional panel
Ceiling mount hallway
2.5 dBi gain
7.5 dBi gain
4 dBi gain
Optical connection Duplex LC transceiver
DC pwr input connection RJ-45 Female
Power input 34 to 48 Vdc
DC power cable
maximum length (Cat-3
or -5 cable)
500 meters (1,641 ft) Any distance beyond 500 meters
requires alternate power sourcing
Power consumption 17 W Typical
Current rating 48 Vdc, 350 mA input
Note: The noise from all remotes is added at the host. Given N units with identical gain and noise,
the formula applies exactly. Slight unit to unit noise figure and gain variations make this a very useful
approximation.