User's Manual Part 9

Screen-Based Reference Remote Displays

Element Management System (EMS) 4.0 User Manual

For the download procedure, refer to Topic Topic 3.14, Downloading Program

Files, on page 50. Table 33 describes the components of the window.

Table 33: Prg Load Window Components

DISPLAY NAME DESCRIPTION

Operational State

Oper Mode This mode is not set here, merely indicated. (The mode is set

using the Opmode tool.) The host should be in a Normal

mode when starting the download. It then changes to

Program Load mode automatically.

Control Program File

<Unnamed Field> <Name><Version>.sr where

Name> = name of program being downloaded

<Version> = major.minor.rev.build

Select Click on this button to browse for and open the program file

you want to download.

Load Click on this button to download the selected program.

Compare Click on this button to compare the version of the selected

control program with the version of the control program

already installed on the unit.

Validate Click on this button to determine whether the FPGA on the

remote unit is in a functional state in which an FPGA can be

downloaded.

For newer hardware, the FPGA will be reported as “not

functional” if the FPGA software did not successfully

download to begin with. If the FPGA is not functional, the

RF system will be in alarm.

NOTE: The response to this button click should be

disregarded for older hardware. The older hardware can be

identified by the FPGA version being “UNKNOWN” (in the

FPGA Program field). On this older hardware, the FPGA is

not downloadable.

Software Info

Init-er Remote Initialization Program version