User's Manual Part 9

Remote Displays Section 7
Element Management System (EMS) 4.0 User Manual
86
4.5.4 Remote DC Pwr Window
The remote DC Pwr (DC Power) window, shown in Figure 76, contains
dashboard displays pertaining to the availability of DC power in the remote unit.
The displays include readings for temperature and availability of AC power
because these conditions affect the DC supply.
Figure 76. Remote DC Pwr Window
Table 29 describes the Temperature display. Table 31 describes the Power Source
display. Table 31 describes the Voltage display.
Pri Rev Synth Lock Primary reverse path synthesizer is out of lock.
Ref Synth Lock Reference synthesizer is out of lock.
Sec Rev Mux Lock Reverse path secondary fiber phase-locked-loop is out of lock.
Sec Rev Synth Lock Secondary reverse path synthesizer is out of lock.
Table 28: Remote Band Indicator
INDICATOR NAME DESCRIPTION
Band Indicates RF bandwidth and sub-band at which unit is
running. If the host unit and remote unit are at different
bands, a Hardware Mismatch alarm is reported (see
Topic 4.4.1 on page 69).
Table 27: Remote Synthesizer Alarms When Faulted (Continued)
ALARM NAME DESCRIPTION