User's Manual Part 9

Commands Section 9
Element Management System (EMS) 4.0 User Manual
100
Apr 3, 2003 1:36:35 PM: DEMS(35 Host.11)EmbarrassMinn SET
SiteName Warroad \
END
Apr 3, 2003 1:36:35 PM DEMS (Host.11)Warroad POST Status \
Site Name from EmbarrassMinn to Warroad \
END
5.5.5 GET SWINFO
This command can be used to determine which software programs and versions
are currently loaded on a network element. You can identify the network element
using either site name or node number. You can also query for all network
elements.
To determine the software loaded on a network element
1. Enter a command in the following format
DEMS Site_Name GET SWINFO
(or)
DEMS Node_Number GET SWINFO
where Site_Name is the site name of the network element, Node_Number
is the Host Node or Remote Node value (as displayed in the Maintenance
interface View Catalog window). Use
Site_Name = ALL to query all net-
work elements.
2. Look for a response like this:
Apr 4, 2003 12:50:54 PM: DEMS (16 Remote.2)IntFalls GET
SWINFO ALL \
Eelpout RIniter 1.05.00.00 \
Eelpout Rifles 1.05.00.00 \
Eelpout 1900 Roundup 1.03.01.00 \
Eelpout FPGA Program UNKNOWN \
END
3. Interpret the response as follows:
• For each software program found there is one line of information.
• Each line contains software name and software version.
• Double
ENDs indicate that all known site names have been returned.