User's Manual Part 8

Screen-Based Reference Host Displays
Element Management System (EMS) 4.0 User Manual
77
Table 18: Host Prg Load Window Components
DISPLAY NAME DESCRIPTION
Operational State
Operating
Mode
This mode is not set here, merely indicated. The host should be in a
Norml mode when starting the download. The mode then changes
automatically to PrgLd or FPGALd.
Control Program File or FPGA Program File
(Unnamed
Field)
<Name><Version>.sr where
<Name> =
name of program being downloaded
<Version> = major.minor.rev.build
Select Click on this button to browse for and open the program file.
Load Click on this button to download the selected program file from the
EMS computer to the host unit.
Compare Click on this button to compare the version of the selected program
with the version of the control program already installed on the unit.
Validate Click on this button to determine whether the FPGA on the host is in
a functional state in which an FPGA can be downloaded. For newer
hardware, the FPGA will be reported as “not functional” if the FPGA
software did not successfully download to begin with. If the FPGA is
not functional, the RF system will be in alarm.
NOTE: The response to this button click should be disregarded for
older hardware. The older hardware can be identified by the FPGA
version being “UNKNOWN” (in the FPGA Program field). On this
older hardware, the FPGA is not downloadable.
Software Info
Init-er Host Initialization Program version
Reflasher Host Reprogram Program version
Control
program
Host Control Program version (<Band> = bandwidth)
FPGA program Field Programmable Gate Array version. If unit is older type with
non-replaceable array, this field will say “UNKNOWN.”