User's Manual Part 5

Task-Based Reference Setting Operating Mode
Element Management System (EMS) 4.0 User Manual
49
To set operating modes
1. From the Tools menu, select Opmode.
2. Click on the host or remote name.
3. For a description of the modes, refer to Topic 4.1.4 on page 60. The modes are
the same for the host and remote units.
CAUTION! Care is needed to prevent damage to the system in Test Mode. Test
Mode causes the system to ignore alarms that would otherwise prevent RF sig-
nals from being transported.
4. Select an operating mode using the pull-down menu after first checking the
CAUTION statements above.
5. Stop an operating mode by selecting another mode. (In the end, select Norml
mode to return the host/remote pair to normal operation.)
Figure 41. Selecting an Operating Mode