User's Manual Part 4

Viewing Alarm Detail Section 3
Element Management System (EMS) 4.0 User Manual
42
3.9 Viewing Alarm Detail
Alarm Detail lists and tells the status for all alarm indicators received from the
host/remote pair. There are separate windows for the host and remote units.
To view alarm detail for a host/remote pair
1. From the View menu, select the names of the host/remote pair.
2. The Alarms windows display as shown in Figure 32.
3. To interpret the host display, see Topic 4.4.1 on page 69. To interpret the
remote display, see Topic 4.5.1 on page 80.
Figure 32. Alarm Detail Example
To view alarm detail using the NOC-NEM interface
Use the GET ALARM command (see Topic 5.5.6 on page 101).