User's Manual Part 2

Installation and System Check Out Checking the System
Element Management System (EMS) 4.0 User Manual
23
2.5 Checking the System
After installing the software and (if possible at this time) connecting your
computer to one or more Digivance host/remote pairs, do the following procedure
to check if the system is running correctly
To check the system
1. Doubleclick on the EMS icon.
2. Watch for the EMS banner to come up.
3. Watch for the initial menu bar to come up.
4. Look for the Alarm Summary window which should identify the host/remote
pairs that are currently connected.
5. If the host/remote pairs are not listed, check your port settings and the serial
cable between the EMS computer and the host/remote pair.