Manual Part 3

Task-Based Reference Defining EMS Ports

Element Management System (EMS) 4.0 User Manual

Figure 15. EMS Initial Screen

3.3 Defining EMS Ports

Using the Preferences window in EMS, shown in Figure 16, you can define the

communication ports to be used by EMS. For a description of the EMS ports, refer

to Topic 1.7, Use of Ports, on page 14.

To display the Preferences window

Select EditÞPreferences.

To define EMS ports

NOTE: EMS default port values may not need to be changed.

1. Check the current setting for two ports in the top left area of the Preferences

window (shown in Figure 16):