Manual Part 3

Entering Host/Remote Site Numbers and Site Names Section 3

Element Management System (EMS) 4.0 User Manual

Figure 23. Selecting Demo Mode

When done with all entries in the Preferences window, click on

OK. For changes

to be effective, you have to quit and restart EMS

To set the log file time interval using the NOC-NEM interface

Use the SET RECORD command (see Topic 5.5.10 on page 108).

NOTE: You cannot use NOC-NEM to set the link timeout and cataloging time.

3.7 Entering Host/Remote Site Numbers and Site Names

Site number and site name are the basic identifiers for a network element. Each

host unit must have a unique site number and site name. A remote unit must have

a different site name than its own host unit. Host units and remote also each have a

unique node number, assigned by the system.

To enter a site number or site name for a network element

1. Using the View menu, select the menu item identifying the host/remote pair

for which you want to enter a site name or site number.

NOTE: If the host unit and remote unit have not yet been named, they will be

listed on the View menu as NotNamed/NotNamed.

2. Click on the host or remote Config tab to display it.

3. Click on the Edit button for Site Number or Site Name area within the Con-

fig window (see Figure 24).