Manual Part 3

Task-Based Reference Setting EMS Link Timeout, Cataloging
Element Management System (EMS) 4.0 User Manual
35
Figure 21. Setting EMS Link Timeout
To Set Cataloging Time
Use the pull-down menu shown in Figure 22 to specify the number of seconds that
EMS should look for units on start up or in response to a Tools
ÞRefresh Catalog
request.
Figure 22. Setting Cataloging Time
To set demo mode
If EMS is not currently connected a host/remote pair, you can start demo mode by
selecting Ye s from the pull-down menu shown in Figure 23.