Manual Part 1

Introduction to EMS Common Use Scenarios
Element Management System (EMS) 4.0 User Manual
7
1.4 Common Use Scenarios
This section presents three scenarios in which EMS is used.
1.4.1 Laptop Use for Installation or Routine Maintenance
In this use scenario, shown in Figure 5, an application engineer or technician
carries EMS to a work site such as a telephone closet or rooftop hut and connects
the EMS computer to a BTS server at that work site. This is done when the units
are installed, using EMS to check and adjust operation as the units are turned up.
RF signal levels can be checked, and attenuation and gain values entered.
Figure 5. Laptop Use Scenario
SETTING
PARAMETERS
SYSTEM
STATUS
17025-A
REMOTE
UNIT
LAPTOP
(LOCAL INTERFACE)
HOST
NETWORK
CARD
PCIx
CARD
LINUX
SERVER