User's Manual

ADCP-75-210 • Issue 1 • November 2006
Page 45
© 2006, ADC Telecommunications, Inc.
Figure 31. Cable Connection Points
2.7.3 Installing RF Cabling
RF cabling on the RAN connects the RF antenna to the RF input on the back of the RAN. There
are five Type N receptacles on the antenna and five Type N receptacles on the back of the RAN,
identified in Table 21 on page 47.
There are two main steps in installing RF cables: weatherproofing the cables, and routing and
securing the cables.
21287-A
RF LINE CONDUIT
(FROM ANTENNA)
TYPE N CONNECTORS
FOR ANTENNA AND
GPS CONNECTORS
LEFT
RAIN
SHIELD
FIBER OPTIC
CONDUIT
FIBER OPTIC
ENTRANCE
RIGHT
RAIN
SHIELD
POWER ENTRANCE
220 VAC PRIME POWER
220 VAC RIGID
CONDUIT
GROUND
WIRE
GROUND
LUG