User Manual

ADCP-75-179 • Preliminary Issue A • September 2004 • Section 3: Operation
Page 3-16
© 2004, ADC Telecommunications, Inc.
Figure 3-12. HOST RF Display
5. Click on the Host Rev Att field Edit button (see Figure 3-12). The Host Rev Att pop-up
screen will open as shown in Figure 3-13.
Figure 3-13. Host Rev Att Pop-Up Screen
6. Enter the attenuation value that will provide the required gain. Refer to Table 3-3 for the
attenuation values and the corresponding gain (nominal) values.
7. Click OK to close the pop-up screen and to make the changes take effect.
Click Edit button to
open the Host Rev Att
pop-up screen