User Manual

ADCP-75-179 • Preliminary Issue A • September 2004 • Section 2: Description
Page 2-19
© 2004, ADC Telecommunications, Inc.
On an optional basis, the cabinet is available either with or without a battery compartment. The
battery compartment version provides a mounting tray for a back-up battery. The slim-style
cabinet is designed for use in an outdoor environment but may be mounted indoors if required.
Opening the hinged door provides full access to the interior of the enclosure to facilitate module
and cable installation.
The slim-style single-STM cabinet user interface consists of the various connectors, fittings,
outlets, and switches that are provided on the interior and exterior of the enclosure. The user
interface points are indicated in Figure 2-10 and Figure 2-11. For additional information, refer
to the Digivance LRCS System Slim-Style Single-STM Remote Unit W/Battery Installation and
Maintenance Manual (ADCP-75-165); or the Digivance LRCS System Slim-Style Single-STM
Remote Unit Without Battery Installation and Maintenance Manual (ADCP-75-173).
Figure 2-10. Slim-Style Single-STM Cabinet User Interface - Top Front View
(7) DOOR
SWITCH
(8) AC
POWER CORD
(1) AIR INLET
FILTER
(3) STM
MOUNTING
SLOT
(2) LPA
MOUNTING
SLOT
(5) WDM/CWDM
MOUNTING SLOT
(4) BATTERY
TRAY
(6) CWDM
POWER CORD
19295-B