User Manual

ADCP-75-179 • Preliminary Issue A • September 2004 • Section 2: Description
Page 2-17
© 2004, ADC Telecommunications, Inc.
The AC power, fiber optic, and antenna cables route to the front of the indoor mounting shelf for
connection to the STM front panel. A lightning protector kit (accessory) is available separately
if lightning protection is required. A grounding lug is provided on the side of the mounting shelf
for connecting a grounding wire.
The indoor mounting shelf user interface consists primarily of the mounting slots and the AC
and DC power cables. The user interface points are shown in Figure 2-8. For additional
information, refer to the Digivance LRCS System Indoor Remote Unit Installation and
Maintenance Manual (ADCP-75-160).
Figure 2-8. indoor Mounting Shelf User Interface
6 SLIM-STYLE REMOTE UNIT CABINETS
This section provides a brief description of the slim-style remote unit cabinets. Four types of
slim-style cabinets are available. For complete information, refer to the Installation and
Maintenance Manual for the cabinet.
Each slim-style cabinet enclosure is constructed of heavy gauge aluminum and is painted putty
white for reduced solar loading and corrosion protection. Connection and entry points are
provided in the bottom of the enclosure for the antenna coaxial cables, fiber optic cable, and AC
power cable. Vent openings are provided in the bottom of the enclosure to permit air exchange
for cooling.
19009-A
(1) STM 
MOUNTING 
SLOT
(5) WDM 
MOUNTING 
SLOT
(2) LPA 
MOUNTING 
SLOT
(3) GROUNDING 
STUDS (INSIDE)
(6) CWDM 
MOUNTING 
SLOT
(7) CWDM DC 
POWER CABLE
(4) AC POWER 
CABLE