User Manual

ADCP-75-179 • Preliminary Issue A • September 2004 • Section 2: Description
Page 2-16
© 2004, ADC Telecommunications, Inc.
5 REMOTE UNIT MOUNTING SHELF
This section provides a brief description of the remote unit indoor mounting shelf. For complete
information, refer to the Installation and Maintenance Manual for the mounting shelf.
5.1 Indoor Mounting Shelf
The indoor mounting shelf, shown in Figure 2-7, is a rack-mountable frame assembly that
provides mounting slots for the STM, LPA, WDM (accessory), and CWDM (accessory)
modules plus connectors and a wiring harness for interfacing the STM and LPA modules. The
mounting shelf is designed for indoor installation in a 19- or 23-inch, EIA or WECO,
equipment rack. The frame assembly is constructed of aluminum and steel and is painted putty
white for corrosion protection. The indoor mounting shelf does not provide a mounting slot for
a back-up battery.
Figure 2-7. indoor Mounting Shelf
14.15 IN.
(359 MM)
16.06 IN.
(408 MM)
16.89 IN.
(429 MM)
TOP VIEW
FRONT VIEW
19008-A