User Manual

ADCP-75-179 • Preliminary Issue A • September 2004 • Section 3: Operation
Page 3-4
© 2004, ADC Telecommunications, Inc.
8. Start up the EMS Version 3.01 software program. The EMS main window will open as
shown in Figure 3-1. Note: The EMS software should be installed on a PC-type computer
and the PC’s COMM port should be configured to interface with the HU. For information
about installing the EMS software and configuring the PC’s COMM port, refer to the
Digivance Element Management System Version 3.01 User Manual (ADCP-75-151).
Figure 3-1. Digivance Element Management System Main Window
9. Open the View drop down menu and connect to the Host and Remote pair by selecting the
“NotNamed/NotNamed” Host/Remote pair. The HOST Alarms display and the REMOTE
Alarms display will open within the main window as shown in Figure 3-2.
Figure 3-2. Selecting Display Tabs
Click to view drop
down menu
Clicking on the tabs in
this list will open the cor-
responding display.
Host/Remote pair
site name