User Manual

ADCP-75-179 • Preliminary Issue A • September 2004 • Section 2: Description
Page 2-26
© 2004, ADC Telecommunications, Inc.
Figure 2-19. CWDM Host Module and Host Module Mounting Shelf
8 DIGIVANCE ELEMENT MANAGEMENT SYSTEM
The Digivance Element Management System (EMS) is a software-based network management
tool that provides control and monitoring functions for the Digivance system. Digivance EMS is
used to provision and configure new systems for operation, set system operating parameters, get
system alarm and status messages, and upgrade the system software. Digivance EMS supports
local control by an on-site service technician and also remote control through a Network
Operations Center (NOC) interface or an SNMP interface.
8.1 Digivance EMS Primary Components
The primary components of the Digivance EMS, shown in Figure 2-20, are packaged separately
from the various Digivance hardware items and consist of the following items: User Manuals,
mouse pad, license agreement, and three CD-ROMs which contain both software and various
technical publications. All software items install on a PC-type computer which is not provided.
A cable (DGVL-000000CBPC) for connecting the EMS computer to either the HU or RU is
available separately as an accessory item.
18647-A