User Manual

ADCP-75-150 • Preliminary Issue A • March 2003 • Section 5: Maintenance
Page 5-20
© 2003, ADC Telecommunications, Inc.
10. Connect the fan assembly wiring harness connector to the LPA internal connector.
11. Secure the fan assembly to the LPA using the four retainers removed in step 5.
12. Place the STM On/Off switch in the ON position (press I) and verify that the fan operates
properly. The fan should draw air into the LPA.
13. Notify the NOC or alarm monitoring system operator that the system is going back online.