User Manual

ADCP-75-150 • Preliminary Issue A • March 2003 • Section 3: Host Unit Installation
Page 3-3
© 2003, ADC Telecommunications, Inc.
Figure 3-1. Typical OSP Cable Routing
At the RU outdoor cabinet, the OSP fiber optic cable should be spliced to a connectorized
outdoor-rated cable (consisting of individual jacketed pigtails) which is routed into the cabinet.
The individual pigtails can then be connected directly to the STM optical ports. A connector is
provided on the bottom of the RU outdoor cabinet to seal the cable entry point and provide
strain relief. The procedure for routing the fiber cable into the cabinet and for connecting the
pigtail leads to the STM is provided in the Digivance 20 Watt Outdoor Remote Unit Installation
Instructions (ADCP-75-148).
HOST UNIT
FIBER DISTRIBUTION PANEL
X
X
STM
REMOTE SITE
HOST SITE
PATCH
CORD
SPLICE
PIGTAIL
SPLICE
ENCLOSURE
INDOOR/OUTDOOR
CABLE WITH
PIGTAIL LEADS
OUTSIDE PLANT
CABLE
REMOTE UNIT
CABINET
16889-A