User Manual

ADCP-75-150 • Preliminary Issue A • March 2003 • Section 2: Description
Page 2-32
© 2003, ADC Telecommunications, Inc.
Note 1: Required for co-located sites such as dual band. Otherwise, the emissions from one unit
can limit the sensitivity of the other.
Antenna cable connector N-type female (on STM)
Fiber optic cable connector SC-type (on STM)
Service connector DB-9 female (on STM) RS-232 DTE interface
Power input 120 or 240 VA C , 50 or 60 Hz Operation on 240 Vac requires
power cord with 240 Vac plug.
Power consumption 1200 watts
Current rating 9 Amps at 120 Vac
Reliability at 25ºC MTBF 50,000 hours Excluding fans and air filters
Table 2-6. 800 MHz 20 Watt System Nominal Specifications, continued
PARAMETER SPECIFICATION REMARKS