User Manual

ADCP-75-192 • Issue D • October 2005 • Section 2: Description
Page 2-18
 2005, ADC Telecommunications, Inc.
Additionally, the EEPROM will contain the offset from the +12 dB gain setting. This includes:
• Data for each channel (1-4)
• Offset for the start and end of each band
This data will be used when balancing a system. It is intended that software will automatically
normalize the gains across channels to insure that the output data from the FSC has all
channels equalized in gain to within 1 dB.
Figure 2-12. Full Band HDC Interface
4.2 Forward Simulcast Module, FSC
The Forward Simulcast module converts the IF signals from the HDC to Digitized IF (DIF)
format. This module is specified at one per sector per tenant per 8 RAN’s.
The front panel indicators for the Forward Simulcast Card are: