User Manual

ADCP-75-192 • Issue D • October 2005 • Section 2: Description
Page 2-12
 2005, ADC Telecommunications, Inc.
(2) FAULT LED
(4) P OWER LED
(3) CHANNEL 2
(1) CHANNEL 1
Figure 2-7. RDC2 Front Panel
Table 2-7. RDC2 User Interface
REFN
o.
USER INTERFACE
DESIGNATION DEVICE FUNCTIONAL DESCRIPTION
1 Channel 1 RF
Connector
SMA connector RF input for Channel 1
2 Fault LED Single-colored LED
(Red)
Status indicator turns red when module has
failed. Indicator is lit during start-up until
the module has initialized. Indicator will
blink after module receives a system clock
and is awaiting initialization
3 Power LED Single-colored LED
(Green)
Status indicator turns green when module
has power.
4 Channel 2 RF
Connector
SMA connector RF input for Channel 1