User Manual

ADCP-75-192 • Issue D • October 2005 • Section 4: BTS Integration
Page 4-5
 2005, ADC Telecommunications, Inc.
Table 4-3. RAN Output - 8 Tenant
BAND PCS PCS PCS PCS CELL CELL CELL CELL SMR
PROTOCOL CDMA GSM TDMA EDGE CDMA GSM TDMA EDGE IDEN
# Carrier
1 39.5 40.5 40.5 40.5 36.5 37.5 37.5 37.5 37.5
2 36.5 37.5 37.5 37.5 33.5 34.5 34.5 34.5 34.5
3 34.7 35.7 35.7 35.7 31.7 32.7 32.7 32.7 32.7
4 33.5 34.5 34.5 34.5 30.5 31.5 31.5 31.5 31.5
5 32.5 33.5 33.5 33.5 29.5 30.5 30.5 30.5 30.5
6 31.7 32.7 32.7 32.7 28.7 29.7 29.7 29.7 29.7
7 31.0 32.0 32.0 32.0 28.0 29.0 29.0 29.0 29.0
8 30.5 31.5 31.5 31.5 27.5 28.5 28.5 28.5 28.5
Note: Recommended carrier counts (by band/protocol) are in the grayed boxes
3.1 Forward Path Balancing
Note that for all steps below the value of "X" in MIB fields refers to the Channel 1-8, the value
of "Y" in MIB fields refers to RAN ID 1-8, and the value of "Z" in MIB fields refers to
module/path.
3.1.1 Initialization
The next section outlines the preparation for balancing the forward output.
1. Set all BIM attenuator offsets to 0 dB for this Tenant Sector using the
transceptTenantMore AttenTable.transceptTenantBimForwardAttenZOffset fields forhis
tenant's BIM module.
2. Using the transceptTenantCalTable.transceptTenantFscAttenX fields of the Tenant OAM
MIB, set all FSC digital attenuations to 0 dB (8 channels)
3. Using the transceptTenantOAMTable.transceptTenantRanDisableY fields of the Tenant
OAM MIB, disable all RAN PAs for this Tenant Sector
4. Using the transceptTenantOAMTable.transceptTenantForwardAGCDisable field of the
Tenant OAM MIB, disable Forward Autogain on the Hub and all RANs on this Tenant
Sector