User Manual

ADCP-75-192 • Issue D • October 2005 • Preface
Page viii
 2005, ADC Telecommunications, Inc.
ABOUT THIS MANUAL
This installation and operation manual provides the following information:
• An overview of the Digivance CXD system.
• A description of the basic system components including the Digital Chassis, RF
Chassis, CPU, STF, HDC, HUC, SIF, FSC, RSC, cPCI Power Supplies, RAN, RDC,
RUC, and LPA.
• Installation procedures for the HUB assembly.
• Procedures for tuning-up the system and verifying that the system is functioning
properly.
• Procedures for maintaining the system including troubleshooting problems and
replacing faulty components.
• Product warranty, repair, return, and replacement information.
The procedures for installing the remote unit and for installing and using the EMS software
are provided in other publications which are referenced in the Related Publications section
and at appropriate points within this manual.
RELATED PUBLICATIONS
Listed below are related manuals and their publication numbers. Copies of these publications
can be ordered by contacting the ADC Technical Assistance Center at 1-800-366-3891,
extension 73476 (in U.S.A. or Canada) or 952-917-3476 (outside U.S.A. and Canada).
Title/Description ADCP Number
Digivance CXD Installation Manual 1001669
Provides instructions for installing the CXD HUB, RAN cabinet, modules,
LPA and optional battery in the remote unit cabinet and for installing and
connecting the fiber optic, coaxial, and AC power cables.
Digivance CXD/NXD EMS-SNMP Manager 1001516
Provides instructions installing the Digivance EMS and SNMP software and
isolating faults and troubleshooting system performance.
Digivance CXD/NXD Hardware Configuration Manual 1001542
Provides instructions for installing the Digivance CXD and NXD hardware.